Filter
Top Products
FX
3G
/FX
3U
/FX
3UC
PLC User's Manual - Positioning Control Edition
Built-in Positioning Functions
11 Batch Data Positioning Mode (TBL Instruction)
11.4 Positioning Parameter Setting
B - 150
4 Transfer the parameters (+ sequence program) to the PLC.
1. Select "Online" from the tool menu, and then select "Write to PLC". The "Write to PLC"
window will appear.
*1. For Ver. 8.13P to 8.24A of GX Developer, the PLC type is FX3UC.
2. Enter a check in the "PLC parameter" check box, and then click the "Execute" button.
The selected parameter data will be transferred to the PLC. When the PLC is started (enters the RUN mode),
the transferred parameter data will be enabled. If the communication conditions set on the "PLC system(2)"
screen are changed, be sure to power the PLC OFF, and then ON again.
*1