6-9
ISS 506 Integration Seamless Switcher • HTML Operation
Email Alerts page
Reach the Email Alerts page (figure 6-8) by clicking the Email Alerts link on the
System Configuration page. The Email Alerts screen enables you to set up the
ISS 506 to automatically send e-mail alert messages when settings are changed
on the ISS 506. You may enter up to 64 e-mail addresses to alert recipients that an
event has occurred.
You can also specify that SMTP (Simple Mail Transfer Protocol) authorization is
needed for the ISS to accept incoming e-mail. This prevents spam from taking up
space in the ISS’s e-mail system.
For the e-mail settings and for each row of the e-mail notification settings, click the
Edit button to make the fields available for editing. The button changes to Save.
After editing the settings associated with the Edit/Save button, click the Save
button.
Scan Converter Board*
* The Scan Converter Board link is available only if the optional scan converter output board is
installed.
ISS Settings
System Settings
Passwords
Refresh
Firmware Upgrade
Figure 6-8 — Email Alerts page
Setting up e-mail alerts
Set the ISS to send e-mail alerts when settings are changed as follows:
1
. On the Email Alerts screen, click the Edit button located to the right of the
Mail IP Address and Domain Name fields. The button changes to Save.
2
. Enter your ISS 506’s IP address and your domain name in the appropriate
fields. (This information is available from your network administrator.)
3
. If your ISS has password(s) assigned, enter them.
4. Click the Save button.
