
3-37
ISS 506 Integration Seamless Switcher • Operation
Adjust an image as follows (figure 3-29).
1. Press the desired input button to select the input to adjust.
N
The adjustments are made to the input signal that is switched to the output
(preview or program) shown in the LCD window.
N
Color adjustments are available only for component video, S-video, and
composite video inputs.
Tint adjustments are available only for S-video and composite NTSC video
inputs.
2.
Press the appropriate picture adjustment button: Size, brightness and contrast
(Brt/Cont), Detail, Position, color and tint (Col/Tnt), or Zoom. The LCD
window shows the name of the adjustment and the current setting value.
3.
Rotate the Adjust [ knob or the Adjust { knob to vary the settings within the
following adjustment ranges:
N
The Adjust knobs have no mechanical limits to their rotation.
• Size: Observe the display and turn the Adjust [ knob to increase or
decrease the horizontal size of the image. Turn the Adjust { knob to
increase or decrease the vertical size of the image. The adjustment range
depends on the output resolution that was selected.
• Brightness/Contrast: The range for both adjustments is 0 to 127.
• Detail Filter: Either knob adjusts within a range of 0 to 127.
• Position: Observe the display and turn the Adjust [ knob to center the
image horizontally or the Adjust { knob to center the image vertically.
The adjustment range depends on the output resolution that was
selected.
• Color/Tint: The range for both adjustments is 0 to 127.
• Zoom: Observe the display and turn either the Adjust [ or the Adjust {
knob to zoom in or out on the image. The adjustment range depends on
the output resolution that was selected.
4.
Repeat steps 2 and 3 for each image adjustment to be made for that input.
Toggling background illumination on and off
The buttons on the front panel can be set to provide amber background
illumination (green for the Freeze buttons) at all times or the background
illumination can be turned off. To toggle the background illumination on or off,
press and hold the Color/Tint and Brightness/Contrast buttons simultaneously for
approximately 2 seconds (figure 3-30).
PICTURE
ADJUSTMENTS
DETAIL
ZOOM
BRIGHT/
CONT
COLOR/
TINT
SIZE
POSITION
Press and hold the Color/Tint and
Brightness/Contrast buttons simultaneously to
toggle background illumination mode on or off.
After approximately 2 seconds,
release the buttons.
Figure 3-30 — Toggle background illumination on or off