SIS
Programming and Control, cont’d
ISS 506 Integration Seamless Switcher • SIS
Programming and Control
4-12
Command ASCII (Telnet)
(host to switcher)
URL Encoded (Web)
(host to switcher)
Response
(switcher to host)
Additional description
Input selection
Select video and audio
X@
*
X!
!
X@
*
X!
! Out
X@
•In
X!
•All
]
Select video and audio input
X!
to the
X@
output.
Example:
1*2! 1*2!
Out1•In2•All
]
Input 2 video and audio selected to the
program output.
Select video only
X@
*
X!
&
X@
*
X!
& Out
X@
•In
X!
•RGB
]
Select video input
X!
to the
X@
output.
Example:
2*5& 2*5&
Out2•In5•RGB
]
Input 5 video only selected to the preview output.
Select audio only
X@
*
X!
$
X@
*
X!
$ Out
X@
•In
X!
•Aud
]
Select audio input
X!
to the
X@
output.
Transition effects
N
The function and variables associated with the various Effect commands (4*1#, 4*2#, 4*3#, and 4*4#) differ, depending on the effect selected.
Dissolve effect and duration
N
The “nnn” and “n” variables in the dissolve effect and duration responses below have no meaning.
Although they look similar, the set dissolve effect command (4*1*#) and set dissolve duration command (4*1*
X#
#) must be sent separately for them to make the desired change.
Set the dissolve effect 4*1*# 4*1*#
Eff1*
X#
*nnn*1*n
]
Set the switching effect to dissolve for “take”
operations.
N
The set dissolve command (4*1*#) cannot include the duration (
X#
) value). The duration can be added in a separate command (see below).
The command does not work without the trailing asterisk (4*1
*#).
Set dissolve duration
4*1*
X#
# 4*1*
X#
# Eff1*
X#
*nnn*
X$
*n
]
Set the dissolve duration to
X#
.
N
The set dissolve duration command (4*1*
X#
#) must include the leading “1” variable to specify that the
X#
value is to be applied to the dissolve effect.
If a different effect is selected (an effect button other than Dissolve is lit on the front panel), this command sets the duration, but does not select the dissolve effect.
Example:
4*1*25# 4*1*25#
Eff1*025*nnn*1*n
]
Set the dissolve switching effect duration
to 2.5 seconds
. In this example, the “1” in the
response indicates that dissolve is the selected
effect.
View dissolve status 4*1# 4*1#
X#
*nnn*
X$
*n
]
Command/response table for SIS commands
N
Links are presented in some of the commands below to redirect you to take you to descriptions of comparable front panel
operations for more details about the operation.
N
X!
= Input number 1 – 6
X@
= Output number 1 = Program 2 = Preview 3 = PIP window 4 = PIP image
X#
= Effect duration 00 – 50 (5.0 seconds in 0.1-second increments)
X$
= Effect status 1 = selected 2 = deselected
