Installation, cont’d
ISS 506 Integration Seamless Switcher • Installation
2-6
Output connections
Video output connections
N
The two Program Video outputs, consisting of one set of five BNC connectors
and a 15-pin HD connector, output identical video signals at the same
resolution, refresh rate, and sync format.
The Program connectors (
f
and
g
) output the video image for the program
monitor or projector. The Preview connectors (
h
) output the video image for the
local monitor.
f
Program video output BNC connectors — Connect an RGB or component
video display to these female BNC connectors. Figure 2-8 shows how to
connect the various video formats.
RGBHV
Video
RGBS
Video
RGsB and
Component
Video
S
H
V
G
/Y
R
R-Y
B/
B-Y
S
H
V
G
/Y
R
R-Y
B/
B-Y
S
H
V
G
/Y
R
R-Y
B/
B-Y
Figure 2-8 — BNC output connections for RGBHV, RGBS, RGsB, and
component video
g
Program video output 15-pin HD connector — Connect an RGB
or component video display to this female 15-pin HD connector.
h
Preview video output 15-pin HD connector — Connect an RGB
or component video display to this female 15-pin HD connector.
Optional video output connections
One of three possible output expansion boards can be installed in this location. The
expansion board receives the program output. The available output boards are:
• ADVIoutputboard
• Ascanconverter(lowresolution)outputboard
• AnHD-SDIoutputboard
