A SERVICE OF

logo

Modifications, cont’d
ISS 506 Integration Seamless Switcher • Modications
7-4
3. From the inside of the switcher, pop the cover out of the rear panel connector
port (
c
).
4
. See figure 7-3. Tip the input board up and guide its output connector through
the rear panel connector port (
d
).
4
5
5
5
Figure 7-3 — Input board installation
5. See figure 7-3. Align the connectors on the main board and input board (
e
).
Gently apply pressure to carefully mate the board with the main board.
6
. See figure 7-4. Secure the input board to the standoffs on the main board with
the three included screws (
f
).
6
6
6
Figure 7-4 — Secure the input board to the standoffs