3-7
ISS 506 Integration Seamless Switcher • Operation
Default
Cycle
Menu
Menu
Menu
Menu
Next
Menu
Menu
Menu
Menu
Menu
Menu
Menu
Input
Configuration
Auto
Image
Output
Configuration
Effects
Configuration
Logo
Capture
User
Presets
Advanced
Configuration
View Comm
Settings
Scan Converter
Configuration
Exit Menu
Press Next
*
30 sec.30 sec. 30 sec. 30 sec.
30 sec.
30 sec. 30 sec.
30 sec.
Input #1
through
input #6
Input #1
through
input #6
Next
RGB
1-4
, YUV-HD
1-4
,
YUVp
1-4
, RGBcvS
1-4
,
YUVi
1-5
, S-Video
1-6
,
Composite
1-6
,
Auto YUV
1-4
, SDI
6
,
HDSDI
6,
Auto SDI
6
NOTE The small numbers after each listed video format (such as
RGB
1-4
) indicate the input(s) for which this video format is valid.
-18 dB to
+24 dB
Next
Input #1
through
input #6
Off or On
Next
Input #1
through
input #6
Variable
depends on
the input.
Variable
depends on
the input.
Input #1
through
input #6
00
through
31
Next Next
Input #1
through
input #6
Input #1
through
input #6
Input #1
through
input #6
Input #1
through
input #6
00
through
31
Next
Input #1
through
input #6
Next
30 sec. 30 sec. 30 sec.
Next Next
Next
Nex
t
Menu
Input #1
RGB
Input #1
V Start:0000
Input #1
H Start:0000
Input #1
Preview Phase:0000
Input #1
Program Phase:0000
Audio #1 Level
0 dB
Input #1
Film Mode Off
Input #1
Tot. Pixels:1344
Input #1
Act. Pixels:1024
Input #1
Act. Lines:0768
* This menu is available
only if the optional
scan converter board
is installed.
Total pixels
depend on
the input.
Active pixels
depend on
the input.
Active lines
depend on
the input.
Figure 3-4 — Input Configuration menu flowchart
Input format submenu
Rotate the Adjust [ knob while the Input format submenu is active to select
an input to configure. Rotate the Adjust { knob to select the correct video
format (RGB, HDTV component video, progressive component video [YUVp],
RGBcvS, low resolution component video [YUVi], S-video, composite video, or
SDI/HD-SDI) for the selected input.
N
The RGB, HDTV and progressive component video, and RGcvS formats are
displayed for inputs 1 through 4 only.
The low resolution component video format is displayed for inputs 1 through 5 only.
The S-video and composite video formats are displayed for all inputs.
The SDI video input and HD-SDI video input are displayed for input 6 only,
and only if the optional SDI input board is installed.
The Auto YUV selection detects between YUVi, YUVp, and YUV-HD as the
input format.
The Auto SDI selection measures the input frequency and automatically sets the
scaler to either SDI or HD-SDI.
