Operation, cont’d
ISS 506 Integration Seamless Switcher • Operation
3-4
h
Status display — The 16-column by 2-line LCD window displays
configuration menus and status information. See “Menu system overview”,
below, and “Front Panel Operations”, later in this chapter, for details.
i
Menu button — The Menu button enters and moves through the main menu
system in the ISS. See “Menu system overview”, below, and “Front Panel
Operations”, later in this chapter, for details.
Next button — The Next button steps through the submenus in the ISS menu
system. See “Menu system overview”, below, and “Front Panel Operations”,
later in this chapter, for details.
j
Adjust [ (horizontal) and Adjust { (vertical) knobs — The Adjust [ and
Adjust { knobs change settings when used in conjunction with the menu
system or the picture adjustment buttons.
k
Volume knob — The Volume knob changes the attenuation of the audio
output on the Program Variable audio output.
N
The Preview Output and the Fixed Program audio output connectors are not
affected by the front panel Volume control.
Menu system overview
Figure 3-2 shows a flowchart of the main menus in the menu system.
N
On figure 3-2 and all other flowcharts in this chapter, solid lines indicate screen
changes initiated by the operator. Dashed lines indicate screen changes that are
the result of a timeout function.
Menu button — Press the Menu button to activate the menu system and to scroll
through the nine or ten main menus.
Next button — Press the Next button to move between the submenus of a selected
main menu, to activate a submenu for viewing or configuration, and to save
a selection. Pressing the Next button during input configuration causes the
current input’s number and format type to be displayed on the LCD window.
Adjust [ and Adjust { knobs — When a submenu is active, rotate the Adjust [
knob and Adjust { knob to scroll through the submenu options and select a
setting.
When one of the picture adjustment buttons is selected, rotate these knobs to
change picture settings.
Refer to the flowcharts in this chapter and to specific sections for explanations
of the knob adjustments.
N
If you press the Menu button while a main menu is active, the next main menu
becomes active.
If you press the Menu button while a submenu is active, the LCD window backs
up to display that submenu’s main menu.
N
To return to the default screens, let the switcher remain idle for 30 seconds until
the selected screen times out; or press the Menu button until the Exit Menu
appears, then press the Next button.
N
From any menu or submenu, after 30 seconds of inactivity, the ISS saves all
adjustment settings and times out to the default LCD display cycle.
