Filter
Top Products
Chapter 9: Screen pops
100 Avaya IP Agent Installation and User Guide for Citrix June 2007
● Start Time (%s) - Passes the time when the telephone call was received by Avaya IP
Agent
● Date (%d) - Passes the current date when the telephone call is received by Avaya IP
Agent
You may also specify these parameters manually within the URL address string.
11. After entering the URL address or filename, select the Next button.
12. If you specified any parameters to be used in the Action window, you are presented with
the Format Call Information window for each parameter. In this window, you can specify
the number of characters or digits used for that parameter in the screen pop.
If you want to limit the number of characters presented for each parameter, do the
following steps:
a. Enable the check box on the specific parameter screen.
b. Use the Number of characters to include and Location fields to adjust the
boundaries of the string.
c. After you have specified the boundaries of the parameter string, select the Next
button.
If more than one parameter was specified in the Action dialog box earlier, the Format Call
Information for the next parameter is presented. Select the Next button when you have
finished configuring each parameter.
If there are no more parameters to configure, Avaya IP Agent displays the Testing dialog
box.
13. Select the Test button to verify that the configuration of this screen pop works as intended.
If you are using parameters in your screen pop, you will be presented with another dialog
box that allows you to enter Caller Name, Caller Number, Prompted Digits, VDN, and
UUI as test information. Select the Continue button when all necessary test information
has been entered in these fields.
Avaya IP Agent starts the screen pop.
14. After you have confirmed that the test of the screen pop was successful, close the screen
pop and select the Next button on the Testing window.
Avaya IP Agent displays the Setup Completed window.
15. Select the Finish button.
Avaya IP Agent saves this screen pop and displays it in the Screen Pops window.