Filter
Top Products
System Configuration Manual
300510EN, Rev AA
December 2010
Rosemount Raptor
5-68
Section 5. Installing a Raptor Level Gauging System
5.8.3 Temperature Sensor Configuration
The 2240S MTT Temperature Sensor tab lets you configure a sensor
connected to the Rosemount 2240S Multi-input Temperature Transmitter.
The 2240S MTT Temperature Sensor tab input fields are disabled in case no
2240S Multi-input Temperature Transmitter is connected to the Tankbus. In
that case, no 2240S temperature transmitter will be mapped to the 2410 tank
database.
To configure the temperature sensors for a Rosemount 2240S, do the
following:
1. In the 22xx ATD window select the 2240S MTT Temperature Sensor tab:
2. The Rosemount 2240S is equipped with a DIP switch that automatically
configures the 2240S for a certain kind of temperature element and
wiring. By selecting the Use Auto Sensor Configuration check box, the
2240S transmitter is automatically configured according to the DIP
switch settings. See the Rosemount 2240S Multi-Input Temperature
Transmitter Reference Manual (Document No. 300550EN) for more
information.
In case a temperature element type is used that does not match the Auto
Sensor Configuration, the 2240S transmitter can be manually configured
as described below.