Filter
Top Products
System Configuration Manual
300510EN, Rev AA
December 2010
5-15
Rosemount Raptor
Section 5. Installing a Raptor Level Gauging System
5.2.5 Protocol Server
Configuration
You can specify which protocol servers that will be connected when starting
TankMaster WinSetup.
To change the current configuration do the following:
1. In the WinSetup workspace select the Protocols folder.
2. Click the right mouse button and choose Configure.
3. In the Connect column, select the check box of each protocol to be
automatically connected when WinSetup starts up.
You may disable a protocol server at any time by using the Disable command:
1. In the Winsetup workspace, open the Protocols folder.
2. Click the right mouse button on the protocol server icon and choose
Disable.