Filter
Top Products
System Configuration Manual
300510EN, Rev AA
December 2010
Rosemount Raptor
5-52
Section 5. Installing a Raptor Level Gauging System
5.7.1 Configuration via
the Properties
Window
This section describes the basic configuration procedure of a
Rosemount 5900S Radar Level Gauge through the 5900S RLG Properties
window.
For a basic configuration of the Rosemount 5900S Radar Level Gauge
perform the following steps:
1. In the WinSetup Workspace window, open the Devices folder and select
the Rosemount 5900S Radar Level Gauge.
2. Click the right mouse button and select Properties, or from the Service
menu choose the Devices/Properties option.
The 5900S RLG Properties window appears.
The Communication, Antenna, and Geometry tabs contain information
for basic configuration of the Rosemount 5900S.
Properties