Filter
Top Products
System Configuration Manual
300510EN, Rev AA
December 2010
Rosemount Raptor
5-132
Section 5. Installing a Raptor Level Gauging System
33. Ensure that Value Source is set to Automatic for the Liquid Pressure
and Vapor Pressure measurement variables.
34. Click the OK button to save the configuration and close the window.
35. Check the result in the Tank Inventory window:
a. Start the TankMaster WinOpi program.
b. In the WinOpi workspace select the tank icon.
c. From the View menu, choose the Tank>Tank Inventory option.
If the calculations seem to be incorrect, see chapter Checklist for
Inventory Parameter Setup in the TankMaster WinOpi Reference Manual
(Document No. 303028EN) for more information.
Check that Value Source
is set to Automatic