Filter
Top Products
System Configuration Manual
300510EN, Rev AA
December 2010
7-37
Rosemount Raptor
Section 7. Service Functions
7.13 PROTOCOL HANDLING
7.13.1 Logging the
Channel
Communication
WinSetup allows you to log communication on the various communication
protocol channels. You can log specific devices, as well as filter out certain
function codes and error types.
To log the communication of a particular protocol channel do the following:
1. In the WinSetup workspace, select the protocol channel icon:
2. Click the right mouse button and choose the View Log option, or from
the Service menu choose Channels/View Log.
3. Specify a log profile. You can filter out certain function codes and devices
as well as error types:
Table 7-1. Realtime log settings
View Log
Filter Settingv Description
Function Code A Function Code defines a specific action or type of data. You can log all
function codes or a specific code.
Device Address You can log all devices or a device with a certain address by your own choice.
Note! The device address is automatically copied from the current settings in
the File Log Settings window, see “Saving the Communication Log to File” on
page 7-39. You can change this address to any other address that you want to
log.
Enable Filtering Mark this check box to enable filtering by function codes and addresses.
Errors Select the check box for the type of error you like to record: Time-out Errors,
Check Sum Errors, or Other Errors. You can select one or more check boxes.
Number of messages Specify the number of messages that will be added each time the
Communication Log window is updated. If the log is updated too quickly, you
may increase the Number of messages value to reduce the update speed.