Filter
Top Products
System Configuration Manual
300510EN, Rev AA
December 2010
5-21
Rosemount Raptor
Section 5. Installing a Raptor Level Gauging System
5.3.6 Tank View Layout The Setup Tank View tab is used to specify variables to be presented in the
Tank View window, see Section 7: Viewing Tank Data.
TankMaster WinSetup allows you to create a new tank view layout and store it
on disk, or load an existing table layout from disk.
To specify a layout do the following:
1. From the Service menu choose Preferences.
2. In the Preferences window select the Setup Tank View tab.
3. Click the Load Table button if you wish to edit an existing Table Layout.
4. In the Available Parameters pane on the left-hand side of the
Preferences/Setup Tank View window, select the parameter to be
presented in the Tank View window (see Section 7: Viewing Tank Data).
5. Click the Move button to move it to the Selected Parameters pane on the
right-hand side of the Preferences/Setup Tank View window.
6. Repeat steps 4 to 5 for each parameter you wish to include.
The Move All button allows you to move all variables at once to the
Selected Parameters list box.
7. Ensure that all parameters to appear in the Tank View window are
included in the Selected Parameters list box as illustrated below: