Filter
Top Products
System Configuration Manual
300510EN, Rev AA
December 2010
Rosemount Raptor
5-86
Section 5. Installing a Raptor Level Gauging System
6. In the 2410 HUB Tag drop-down list choose the Rosemount 2410 Tank
Hub that the 5400 Radar Level Transmitter is connected to.
7. Enter the Modbus address that is used for the 5400 level transmitter.
Note that this address must be stored in the 2160 FCU Slave Database
as well as in the 2410 Tank Database.
8. Click the Verify Communication button to verify that the TankMaster PC
communicates with the 5400 transmitter. The Unit ID will appear when
contact is established.
9. Verify the tank position. The Position in 2410 HUB field shows the tank
position that the 5400 is mapped to in the 2410 tank database. The tank
position indicates which tank the 5400 is associated with. In case the
5400 transmitter is connected to a multiple tank version of the
Rosemount 2410, the 5400 can be mapped to another tank position via
the 2410 Tank Hub Properties/Tank Database window if necessary(in the
WinSetup workspace, click the right mouse button on the 2410 icon and
choose the Properties option).
See “Tank Database Setup” on page 5-42 for more information on how to
configure the 2410 Tank Database.
10. Click the Next button to proceed with the 5400 configuration.
11. For configuration of the 5400 RLT Antenna and the 5400 RLT Geometry
windows refer to the appropriate parts of the description in “Configuration
via 5400 Properties” on page 5-79.
12. For configuration of the 5400 RLT Tank Shape and the
5400 RLT Environment windows, refer to the appropriate parts of the
description in “Advanced Configuration” on page 5-88.