Filter
Top Products
System Configuration Manual
300510EN, Rev AA
December 2010
Rosemount Raptor
3-4
Section 3. Using TankMaster
3.3 INSTALLING THE TANKMASTER SOFTWARE
3.3.1 System
Requirements
The following system specification is recommended to run TankMaster
version 5.B0 or higher
(1)
:
NOTE
A hardware key is not required to run WinSetUp.
3.3.2 Installed
Software
Modules
The following software program modules are installed:
• TankMaster WinSetup program
• TankMaster WinOpi program
• Tank Server
• Modbus Master Protocol server
• Various Master Protocol servers
• Various Slave Protocol servers
• Batch server
(1) For previous TankMaster versions other system requirements apply. Please contact Emer-
son Process Management/Rosemount Tank Gauging for more information.
General
Product Rosemount TankMaster; WinOpi, Winsetup, WinView
Operating system English version of:
• Windows XP Professional Edition. Service pack SP2 or SP3
• Windows 2003 Server with service pack 2 (SP2)
• Windows Vista with service pack 1(SP1)
TankMaster PC
Hardware
Processor
• Windows XP: 2 GHz Intel Pentium double processor
• Windows Vista / Windows 2003 Server: 2.5 GHz Intel Pentium
double processor
Internal Memory (RAM)
• Windows XP: 2 GB (1 GB for clients)
• Windows Vista / Windows 2003 Server: 3 GB
Recommended brand IBM or DELL PC (Windows XP or Windows Vista approved).
Hard Disk 40 GB (TankMaster + SQL Server 2005 Express needs
approximately 600 MB).
Serial Port RS232, or USB if a FBM2180 fieldbus modem is used
Monitor A 22 inch or larger monitor is recommended.
Graphics card 1152*864, 65536 colors (16 bit).
Hardware key One key connected to a USB port for each PC with a TankMaster
server.
In custody transfer systems a hardware key connected to a
parallel port is also required.