Filter
Top Products
System Configuration Manual
300510EN, Rev AA
December 2010
Rosemount Raptor
5-128
Section 5. Installing a Raptor Level Gauging System
13. Verify that the parameters Vapor Pressure and Liquid Pressure are
mapped to the correct pressure sensors (Source Device).
See “Advanced Parameter Source Configuration” on page 5-74 for
further information on mapping system parameters to source devices.
14. Click the OK button to store the configuration and close the window.
15. Open the Tank Configuration window. In Winsetup select the desired
tank icon in the workspace window:
16. Click the right mouse button and choose Properties, or from the Service
menu choose Tanks>Properties to open the Tank Configuration
window.
17. Select the Configuration tab.
Properties