Filter
Top Products
System Configuration Manual
300510EN, Rev AA
December 2010
5-109
Rosemount Raptor
Section 5. Installing a Raptor Level Gauging System
10. Specify parameter value range to be used in various windows for
presentation of measurement data. Also choose whether to use
measurement values (Automatic) from the available instruments or
manual values.
The Free Water Level, Liquid Pressure, and Vapor Pressure parameters
are set to Value Source=Manual by default. Therefore, the tank needs to be
configured for automatic measurements when these type of instruments are
used.
The Value Entry window allows you to disable automatic measurements for
selected parameters in case you need to remove an instrument for service
purposes.
To use manual values do the following:
1. Chose a measurement variable in the left-hand list of the Value Entry
window.
2. Set Value Source to Manual.
3. Type the desired value in the Value entry field.
Now the automatic measurement is disabled for the selected tank
measurement variable. Manual values are marked yellow in order to
distinguish from automatically measured values.