Filter
Top Products
System Configuration Manual
300510EN, Rev AA
December 2010
5-85
Rosemount Raptor
Section 5. Installing a Raptor Level Gauging System
Using the installation wizard
To configure a Rosemount 5400 by using the WinSetup installation wizard
perform the following steps:
1. In the Workspace window select the Devices folder.
2. Click the right mouse button and select Install New, or from the Service
menu choose Devices/Install New.
The Select Device window appears:
3. Choose Device Type 5400 Radar Level Transmitter from the drop-down
list.
4. Enter the level tag used for the radar level gauge.
5. Click the Next button to open the 5400 RLT Communication window.