Filter
Top Products
System Configuration Manual
300510EN, Rev AA
December 2010
5-73
Rosemount Raptor
Section 5. Installing a Raptor Level Gauging System
3. Enter the resulting level offset value in the Level Offset (X) input field.
4. Enter the Upper Dead Zone (UDZ) and the Lower Dead Zone (LDZ) if
needed.
See the Rosemount 2240S Multi-Input Temperature Transmitter
Reference Manual (Document No. 300550EN) for more information on
how to configure these parameters.
5. Click the Apply button to store the configuration, or click the OK button
to store the configuration and close the window.
See the Rosemount 2240S Multi-Input Temperature Transmitter Reference
Manual (Document No. 300550EN) for more information on how to configure
a water level sensor connected to a Rosemount 2240S Multi-input
Temperature Transmitter.