Filter
Top Products
System Configuration Manual
300510EN, Rev AA
December 2010
5-131
Rosemount Raptor
Section 5. Installing a Raptor Level Gauging System
28. Make sure that the Reference Density is measured automatically, i.e.
the check box is unmarked.
29. Click the Apply button to save the configuration, or click the OK button to
save the configuration and close the window.
30. In the WinSetup workspace window select the tank icon:
31. Click the right mouse button and choose Properties, or from the Service
menu choose Tanks>Properties to open the Tank Configuration
window.
32. Select the Value Entry tab.
Reference Density is
automatically measured