Filter
Top Products
System Configuration Manual
300510EN, Rev AA
December 2010
Rosemount Raptor
3-2
Section 3. Using TankMaster
3.2 TANKMASTER
SOFTWARE
PACKAGE
Rosemount TankMaster includes several software modules:
•WinOpi
•WinSetup
• Tank Server
• Master Protocol Servers
• Slave Protocol Server
• Batch Server
• Administrator
Figure 3-1. TankMaster software
modules
WinOpi is the operator´s interface to the Rosemount Tank Gauging system. It
communicates with the Tank Server and the different protocol servers to let
the user monitor measured tank data. WinOpi also provides alarm handling,
batch reports, automatic report handling, historical data sampling as well as
inventory calculations such as volume, observed density and other
parameters.
The WinSetup program is a graphical user interface for installation,
configuration and service of devices such as the 5900S Radar Level Gauge
and the 2240S Multi-input Temperature Transmitter.
The Tank Server communicates with devices via the Master protocol server
and handles configuration data for all the installed tanks and devices. Tank
and device names, configuration data such as antenna type, number of
connected temperature elements and many other parameters are stored by
the Tank Server. The Tank Server collects measured data from connected
devices and provides these data to the WinOpi/WinSetup user interface.
WINSETUP
Tank Server
Master Protocol Server Slave Protocol Server
COM1/USB COM2/USB
Batch Server
WINOPI