Filter
Top Products
System Configuration Manual
300510EN, Rev AA
December 2010
Rosemount Raptor
5-118
Section 5. Installing a Raptor Level Gauging System
7. Select the Tank Database tab:
8. Verify that the new devices connected to the Tankbus appear in the
Device Type column. Devices that appear in the list are communicating
properly on the Tankbus. Devices supported by the Raptor system will
automatically be identified by the 2410.
9. Ensure that the devices to be associated with the new tank are marked
“Not Configured” in the Tank Position column.
10. Map the new devices to a tank in the Tank Position column by selecting
the appropriate number in the drop-down list.
New Devices