Filter
Top Products
System Configuration Manual
300510EN, Rev AA
December 2010
Rosemount Raptor
5-10
Section 5. Installing a Raptor Level Gauging System
5.2.2 Slave Protocol
Channel
Configuration
A Slave protocol allows you to collect data from the TankMaster workstation to
a host computer.
NOTE!
A hardware key must be installed in order to run a slave protocol server.
TRL2 Modbus Communication Setup
To configure the TRL2 Modbus Slave protocol channel do the following:
1. Open the Protocols folder in the Workspace window.
2. Select the ModbusSlave protocol icon.
3. Click the right mouse button and select Properties, or choose
Protocols>Properties from the Service menu.
4. The Protocol Properties window lists enabled and disabled protocol
channels.
5. Select the desired channel.
6. Click the Properties button to configure the protocol channel.
1. Select the Modbus
Slave protocol
2. Click Properties
Properties