Filter
Top Products
System Configuration Manual
300510EN, Rev AA
December 2010
Rosemount Raptor
5-110
Section 5. Installing a Raptor Level Gauging System
The Value Range parameters (Minimum and Maximum) lets you to scale bar
graphs in the Tank View window and other windows (in Winsetup as well as
WinOpi) where bar graphs are used to display product levels.
For example, the Value Range maximum value for Level is normally set equal
to the Tank Reference Height (R), or the maximum level in the strapping table,
to obtain correct scaling of the level bargraphs as illustrated below:
4. Summary.
The Summary window presents information about the current tank
installation. When you click the Finish button, the tank installation is
completed and the tank appears in the WinSetup Workspace. You can choose
not to finish the installation by clicking the Cancel button. Note that if a device
was installed as part of the tank installation process, the device remains
installed and appears in the Workspace although the tank installation was not
completed.
Value range:
Min=0
Max=20 m
Value range:
Min=0
Max=12 m
Name of the
current tank
Associated
devices