Filter
Top Products
System Configuration Manual
300510EN, Rev AA
December 2010
7-11
Rosemount Raptor
Section 7. Service Functions
7.6 VIEW DIAGNOSTIC
REGISTERS
The View Diagnostic Registers window shows a predefined set of diagnostic
input and holding registers. For each device there is a default set of diagnostic
registers which can be changed in the Configure Diagnostic Registers
window. Clicking the right mouse button on a handle opens a dialog window.
The Properties option allows you to review or change parameter values.
To view and configure the diagnostic registers perform the following steps:
1. Select the device icon (for example a Rosemount 2410 or 5900S) in the
TankMaster WinSetup workspace.
2. Click the right mouse button and choose View Diagnostic Registers.
The register values in this window are of read only type. They are loaded from
the device as the window is opened.