Filter
Top Products
System Configuration Manual
300510EN, Rev AA
December 2010
5-31
Rosemount Raptor
Section 5. Installing a Raptor Level Gauging System
Summary of FCU Slave Database entry fields
Slave type 2410 Level, (pos 1A-32A) or 2410 Temp, (pos 1B-32B)
Address The Modbus address used for the connected devices. For level
gauges it is recommended that address 1 to 99 is used. For ATD
devices address 101 to 199 are recommended.
FCU field bus The field bus that the selected device is connected to. In the
standard configuration there are four field buses available.
Temps The number of temperature elements connected to the
temperature transmitter (for example a Rosemount 2240S).
Ain/Cin Automatically configured
Hin Automatically configured
Relays Automatically configured
Interval 1 Automatically configured
Interval 2 Automatically configured
Level Offset Not used