Filter
Top Products
System Configuration Manual
300510EN, Rev AA
December 2010
Rosemount Raptor
5-14
Section 5. Installing a Raptor Level Gauging System
5.2.3 Log File
Configuration
See chapter “Saving the Communication Log to File” on page 7-39 for
information on how to store a communication log on disk.
5.2.4 Changing the
current Protocol
Channel
Configuration
The channel configuration can be changed at any time. Do the following:
1. In the WinSetup Workspace open the Protocols folder and the protocol
subfolder with the enabled channels.
2. Select the channel icon.
3. Click the right mouse button and choose Properties, or from the Service
menu choose Channels>Properties.
4. Choose the appropriate tab and change the protocol settings as
described in the previous sections.
Protocols
Protocol subfolder