Filter
Top Products
System Configuration Manual
300510EN, Rev AA
December 2010
5-125
Rosemount Raptor
Section 5. Installing a Raptor Level Gauging System
5.15 TANK ENTRY The Tank Entry window is used for specifying a number of product parameters
to be used for inventory calculations. TankMaster can use measured data, or
data that is manually entered. To open the Tank Entry window:
1. In the WinSetup workspace select the tank to configure.
2. Click the right mouse button and choose the Tank Entry option:
3. To enter manual values select the check box and type the desired value
in the input field. Manual values are marked with yellow as illustrated
above.
See the Rosemount WinOpi Reference Manual (Document No. 303028EN)
for further information on how to use the Tank Entry window.