Filter
Top Products
System Configuration Manual
300510EN, Rev AA
December 2010
Rosemount Raptor
5-76
Section 5. Installing a Raptor Level Gauging System
5.8.7 2230 Graphical
Field Display
This section gives a brief description of how to configure a Rosemount 2230
Graphical Field Display.
All fields in the 2230 Graphical Field Display tab are disabled if no graphical
field display is associated with the current tank. The Configure Tank Display
2 and Configure Tank Display 3 buttons are disabled if only one Rosemount
2230 is mapped to the current tank database position of the Rosemount 2410
Tank Hub.
To configure the 2230 Graphical Field Display, do the following:
1. In the 22xx ATD window, select the 2230 Graphical Field Display tab:
2. From the drop-down lists in the Units for Display pane, choose the
desired measurement units to be used by the Rosemount 2230 for the
various tank measurement variables.
3. In the Display Tanks box, choose the tanks to present in the Rosemount
2230 display by selecting the appropriate check boxes.
4. In the Display Tank Parameters pane, choose the parameters to be
displayed for each tank by selecting the appropriate check boxes.
5. Enter the toggle time for the displayed tank parameters in the Display
Toggle Time input field. The selected parameters will be displayed for
one tank at a time starting with Tank 1.