Filter
Top Products
System Configuration Manual
300510EN, Rev AA
December 2010
Rosemount Raptor
7-42
Section 7. Service Functions
7.13.3 Searching for
Connected
Devices
You can search for devices on the communication protocol channels:
1. In the WinSetup workspace, open the Protocols folder and the
appropriate protocol sub folder.
2. Select the desired protocol channel. For more information on Protocol
Channels, see “Communication Protocol Setup” on page 5-6.
3. Click the right mouse button and choose the Find Devices option, or
from the Service menu choose Channels/Find Devices.
4. Type the desired values in the First and Last address input fields in
order to restrict the search to a certain range of addresses (maximum
range is 1-255).
5. Click the Start button.
Now the TRL2 fieldbus is scanned for devices within the specified
address range.
The search result is a list of name, type, address, unit id and application
software version of each device that was found.
Find Devices