Filter
Top Products
System Configuration Manual
300510EN, Rev AA
December 2010
Rosemount Raptor
7-12
Section 7. Service Functions
A grey background color of the table cell in the Value column means that the
register is of either Bitfield or ENUM type. An expanded Bitfield/ENUM
window can be opened for that type of registers. Double-click the cell to open
the Expanded Bitfield/ENUM window.
By selecting the Show in Hex check box, registers of Bitfield and ENUM type
can be presented in hexadecimal format.
It is possible to view diagnostic registers for devices of the same type without
closing the window and opening it again for a new device. Press or
buttons to step to the next or previous device. Alternatively, another
device can be selected from the pull down menu to the left.
The Print button lets you print the current register information.
7.6.1 The Configure
Button
The Configure button opens the Configure Diagnostic Registers window
which allows you to change the default selection of diagnostic registers for the
View Diagnostic Registers window for the selected device type:
1. In the Registers Type pull down menu, choose Holding or Input
registers. Input Registers are displayed in blue, Holding Registers in
black.
2. The Group Prefix pull down menu lets you filter the list in the left pane.
NOTE!
Some devices do not support the Group Prefix feature.
3. A standard selection appears automatically in the Selected Registers
pane on the right-hand side of the Configure... window. To add a register
to the list, select it in the left pane and press the button.
To remove a register from the right pane, select it and press the
button.
Registers Type
Group Prefix