Filter
Top Products
System Configuration Manual
300510EN, Rev AA
December 2010
5-115
Rosemount Raptor
Section 5. Installing a Raptor Level Gauging System
5.12.1 Adding a New
Tank and a New
2410 Tank Hub
To add a new tank and new field devices to a Raptor system do the following:
1. Start the TankMaster WinSetup program.
2. In the WinSetup workspace, right-click the icon of the 2160 Field
Communication Unit (FCU) to open the 2160 FCU Properties window.
3. Select the Configuration tab:
4. In case the 2410 is connected to a field bus port on the FCU which has
not been used prior to adding the new 2410 Tank Hub, ensure that the
FCU Properties/Configuration window is properly configured for the 2410
Primary Bus.
For example, you may have to change the Baud Rate setting depending
on the type of communication bus that is used; RS -485 or TRL2.
See “Installing a Rosemount 2160 FCU” on page 5-25 for further
instructions and information.
5. Click the Apply button to save the configuration.
6. Select the Slave Database tab.