Filter
Top Products
System Configuration Manual
300510EN, Rev AA
December 2010
Rosemount Raptor
7-8
Section 7. Service Functions
7.4 VIEWING INPUT
AND HOLDING
REGISTERS
In a Rosemount Raptor system measurement data is continuously stored in
Input registers of devices such as the Rosemount 2410 Tank Hub,
Rosemount 5900S Radar Level Gauge, and other devices. By viewing the
input registers of a device, you can verify that the device is working properly.
Holding registers store various transmitter parameters used to control the
measurement performance.
To view input or holding registers of a certain device do the following:
1. In the WinSetup Workspace, select the device icon:
2. Click the right mouse button and choose the
View Input/Holding Registers option, or from the Service menu
choose Devices>View Input/Holding Registers.
3. Choose Predefined if you would like to see a basic selection of database
registers.
For advanced service the All option allows you to view a range of
registers. Specify a start value in the Start Register input field, and the
total number of registers to be displayed in the Number of Registers
field (1-500).
4. In the Show Values in pane, choose the appropriate register format
Decimal or Hexadecimal.
5. Click the Read button to upload the contents of the device database
register.