Filter
Top Products
System Configuration Manual
300510EN, Rev AA
December 2010
Rosemount Raptor
4-14
Section 4. The WinSetup Main Window
4.5.4 To Change
Protection Level
of Separate
Windows
In TankMaster it is possible to set a Protection Level for a specific window,
e.g. the Properties window for a Rosemount 5900S Radar Level Gauge. This
function is only available if you are logged on at the Administrator (* * * * *)
level. To change the protection level do the following:
1. Put the cursor on the icon at the upper left corner and click the left mouse
button.
2. Choose the Protection Level... option.
NOTE!
You have to be logged on as an Administrator (* * * * *) to be able to change
the Protection Level. To create an Administrator (* * * * *) account, see “To
Administrate User Accounts” on page 4-11.
3. Select the desired protection level from the drop down menus and click
the OK button. Now changes in this window can only be performed if you
are logged on at the specified Protection Level or higher.
2. Select Protection Level.
1. Click icon.