Filter
Top Products
System Configuration Manual
300510EN, Rev AA
December 2010
5-79
Rosemount Raptor
Section 5. Installing a Raptor Level Gauging System
5.9.1 Configuration via
5400 Properties
This section describes the basic configuration procedure for a
Rosemount 5400 series radar transmitter by using the 5400 RLT window.
To configure the Rosemount 5400 Radar Level Transmitter perform the
following steps:
1. In the WinSetup Workspace window, open the Devices folder and select
the desired Rosemount 5400 transmitter.
2. Click the right mouse button and select Properties, or from the Service
menu choose the Devices/Properties option. The 5400 RLT window
appears:
3. Select the Communication tab
Properties