Filter
Top Products
103Control of VTRs and Disk Recorders
Chapter 12 External Devices
2
Using any of the following methods, select the device for which you want
to set the action.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob to make the selection.
3
If using a disk recorder, in the Device>DDR/VTR>File List menu, recall
the file.
For details of settings required to recall a file, see “Sharing disk recorder
file lists” (page 227).
Note
There is a limit of eight disk recorder files that can set on a single timeline.
When not using a disk recorder, skip to step 4.
4
In the <Action> group, select the action.
Cueup: Output a command to cue up to the currently displayed start point.
Start: Output a Play command.
Note
When the stop point and variable speed are both set, the variable speed
setting takes priority.
Stop: Output a Stop command.
Note
Before executing the Stop command, if the timecode for the set stop
point has been reached, or on a disk recorder if the end of the file has
been reached, then at that point the device stops.
5
To set a start point, in the <Start TC> group, press the [Set] button.
A timecode window appears.
If you do not want to set the start point, skip to step 8.
Note
For a disk recorder on which the start point is not set, the file recalled in
the disk recorder when the keyframe point is passed is the subject of the
action.
Knob Parameter Setting Setting values
1 Dev Device number 1 to 12