Sony CCp-8000 Water Dispenser User Manual


 
51DME Special Effect Operations
Chapter 11 DME Operations
2
To set the partition method, press [Partition] and set the following
parameters.
Blind settings
The Blind effect divides the image into bars or wedges, with blocks rotating
like the slats of venetian blinds.
To apply the Blind effect
With the Blind menu displayed, use the following procedure.
1
In the <Mode> group, select [Bar] or [Wedge].
2
To make transition settings, press [Transition] and set the following
parameters.
3
To set the partition method, press [Partition] and set the following
parameters.
When Bar was selected in step 2
When Wedge was selected in step 2
3 Angle Direction of movement 8.000 to +8.000
Knob Parameter Adjustment Setting values
Knob Parameter Adjustment Setting values
1 Width Width of partition 0.000 to 100.000
2 Random Degree of randomness in partition
width
0.000 to 100.000
3 Angle Partition angle 8.000 to +8.000
Knob Parameter Adjustment Setting values
1 Rotation Number of rotations of the blocks 8.000 to +8.000
2 Perspective Degree of randomness in distance
moved by each block
0.000 to 100.000
Knob Parameter Adjustment Setting values
1 Width Width of partition 0.000 to 100.000
2 Offset Degree of randomness in partition
width
5.000 to +5.000
3 Angle Starting angle of effect 8.000 to +8.000
Knob Parameter Adjustment Setting values
4 No Width of blocks 0.000 to 100.000