Sony CCp-8000 Water Dispenser User Manual


 
Chapter 12 External Devices
96
Control of VTRs and Disk Recorders
Cue>: Cueing up in the forward direction.
Cue<: Cueing up in the reverse direction.
Eject: Ejecting cassette.
Stb Off: Stopped in “standby off” mode.
Stop: Stopped in “standby on” mode.
Play: Playing.
FF: Fast forwarding.
Rewind: Rewinding.
Shtl>: Playing in the forward direction in shuttle mode.
Shtl<: Playing in the reverse direction in shuttle mode.
Var>: Playing in the forward direction in “variable” mode.
Var<: Playing in the reverse direction in “variable” mode.
Jog>: Playing in the forward direction in jog mode.
Jog<: Playing in the reverse direction in jog mode.
Current: Shows timecode for current device position.
Start TC: Shows timecode for start point set on device.
Stop TC: Shows timecode for stop point set on device.
Speed: Shows the variable speed set for each device.
Delay: Shows start delay time set on device.
Cueup & Play
Using the device control block or Device menu, you can carry out Cueup &
Play settings (VTR or disk recorder start point, stop point, and start delay time),
and save the settings in an effect register. By recalling this register, you can
carry out automatic control of the VTR or disk recorder.
Notes
In an effect register set on the VTR/disk recorder timeline, Cueup & Play
settings are not possible. To add Cueup & Play settings to such a register,
first clear the VTR/disk recorder timeline setting before carrying out the
operation.
When using a disk recorder with Cueup & Play, if you carry out the
following sequence of operations, the system may freeze on the frame of the
start point.
1. Press the [RUN] button to play to a point close to the end of a file.
2. Stop playback.
3. Press the [RUN] button once more.
In such cases, first recall a different register, then carry out the following
sequence:
1. Recall the original register again.
2. Press the [REWIND] button.
3. Press the [RUN] button.