Sony CCp-8000 Water Dispenser User Manual


 
123Creating and Editing Keyframes
Chapter 13 Keyframe Effects
To modify all keyframes in the effect
Use the following procedure.
1
Press the [EDIT ENBL] button, turning it on.
2
Carry out the necessary modifications on any keyframe.
3
Press the [ALL] button, turning it on.
4
Press the [MOD] button. Alternatively, hold down the [SHIFT] button and
press the [MOD] button.
For the difference in the result, see “Differences in the changes when a
number of keyframes are modified” (page 124).
This makes the modification simultaneously to all keyframes in the effect.
To modify the keyframes in a specified range
Use the following procedure.
1
Press the [EDIT ENBL] button, turning it on.
2
Stop the effect at any keyframe within the range to be modified.
3
Carry out the necessary modifications.
4
Press the [FROM TO] button, turning it on.
The display in the numeric keypad control block shows the current
keyframe number, followed by “TO.”
5
Using the numeric keypad in the numeric keypad control block, carry out
the following operations.
To set the first keyframe in the range to be modified, press the [CLR]
button, then enter the keyframe number, and press the [ENTER] button
to confirm.
To set the last keyframe in the range to be modified, enter the keyframe
number from the numeric keypad, and press the [ENTER] button to
confirm.
6
Press the [MOD] button. Alternatively, hold down the [SHIFT] button and
press the [MOD] button.
For the difference in the result, see “Differences in the changes when a
number of keyframes are modified” (page 124).