Filter
Top Products
Chapter 11 DME Operations
54
DME Special Effect Operations
To apply the Mirror effect
With the Mirror menu displayed, press [Left to Right], [Right to Left], [Top to
Bottom], or [Bottom to Top] to set the reflection method (multiple selections
possible).
Left to Right: Reflect left side on right.
Right to Left: Reflect right side on left.
Top to Bottom: Reflect top side on bottom.
Bottom to Top: Reflect bottom side on top.
To set the position of the border between original and reflection
Use the following procedure.
1
Press [Position].
2
Set the following parameters.
Multi Mirror settings
The Multi Mirror effect divides the image into originals and reflections, lining
them up vertically and horizontally.
To apply the Multi Mirror effect
With the Multi Mirror menu displayed, set the following parameters.
SONY
DME
SO
DM
SO
D
SO
SO
SO
SO
Left to Right
Top to
Bottom
Knob Parameter Adjustment Setting values
1 H Horizontal border position −8.000 to +8.000
2 V Vertical border position −6.000 to +6.000
Knob Parameter Adjustment Setting values
1 Interval H Horizontal distance between
mirrors (original width)
0.000 to 10.000
2 Offset H Amount of horizontal offset of
image with mirrors fixed
−4.000 to +4.000
3 Interval V Vertical distance between mirrors
(original width)
0.000 to 10.000