Sony CCp-8000 Water Dispenser User Manual


 
Chapter 13 Keyframe Effects
136
Path Setting
Path Setting
The term “path” refers to the specification of how interpolation is carried out
from one keyframe to the next.
For details of the notion of path, see “Paths” in Chapter 1 (Volume 1).
Set keyframe paths in the Key Frame>Path menu.
To access the Key Frame>Path menu
In the top menu selection buttons of the menu control block, press
[KEYFRAME], then select HF3 ‘Path.’
Basic Procedure for Path Settings
Selecting the category
From the 16 buttons in the function button area, select the category for which
you want to make the setting.
First row: path settings for the switcher M/E1 to M/E3, and PGM/PST banks
Second and third rows: path settings for User1 to User8
Fourth row: path settings for DME local channel and global channel 3D
transforms and effects
Note
To carry out path operations relating to DME requires the BKDS-9470 DME
Board Set.
Making switcher path settings
This section describes settings for M/E-1 Key1 as an example.
The area for the VF buttons shows the names of items.
A B sign by a button indicates that pressing it opens a more detailed setting
menu.
The status area shows the settings for Xpt, Hue, and Curve. However,
depending on the item, these parameters may or may not be present.
Note
Whenever you set a path or modify its setting, be sure to press the [MOD]
button in the keyframe control block. The setting does not become effective
unless the [MOD] button is pressed.