Filter
Top Products
31DME Special Effect Operations
Chapter 11 DME Operations
3
Set the parameters.
Multi Move Settings
This effect shrinks the image and lines up a number of copies vertically and
horizontally.
For an illustrative figure and other information, see “DME Special Effects” in
Chapter 1 (Volume 1).
Applying the Multi Move effect
Use the following procedure.
1
In the DME menu, select VF2 ‘Video Modify’ and HF2 ‘Multi Move.’
The Multi Move menu appears.
2
Press [Multi Move], turning it on.
The Multi Move effect is enabled. You can adjust the center point of
shrinking, the ratio of shrinking, and the aspect ratio of the shrunken
images with the knobs.
3
Set the parameters.
Parameter limits vary as shown below, depending on the aspect ratio (4:3
or 16:9) selected in the system.
•4:3 mode
Knob Parameter Adjustment Setting values
1 H Horizontal defocusing of video
and key signals
0.00 to 100.00
2 V Vertical defocusing of video and
key signals
0.00 to 100.00
3 All Horizontal and vertical
defocusing of video and key
signals
H value shown
Knob Parameter Adjustment Setting values
1 Center X x-value of shrinking center point
−4.00 to +4.00
2 Center Y y-value of shrinking center point
−3.00 to +3.00