Sony CCp-8000 Water Dispenser User Manual


 
Chapter 16 Engineering Setup
204
Setup for the Whole System
Note
Format a memory card before using it for the first time.
1
Insert the memory card in the memory card slot.
2
In the System>Maintenance menu, using any of the following methods,
select the USB device.
Press directly on the list appearing in the status area.
Press the arrow keys to scroll the reverse video cursor.
3
In the <USB Storage Device> group, press [Format].
A confirmation message appears.
4
To carry out the formatting, press [OK].
This formats the memory card.
Carrying out the primary setting
To specify a USB device with a storage device connected as a primary device,
use the following procedure.
Note
Without this setting, you cannot use the “Memory Card” item in the File menu
to access a memory card on a storage device connected to the USB device.
1
In the System>Maintenance menu, using any of the following methods,
select the USB device you want to set as primary.
Press directly on the list appearing in the status area.
Press the arrow keys to scroll the reverse video cursor.
2
In the <USB Storage Device> group, press [Set Primary].
Reloading a USB driver
To reload a USB driver, in the System>Maintenance menu, press [Reload USB
Driver].
Note
If even after this operation the memory card is not recognized, remove the
memory card and reinsert it, then try again.