Filter
Top Products
285Setup Relating to Router Interface and Tally
Chapter 16 Engineering Setup
Tally Copy Settings (Tally Copy Menu)
For settings relating to the tally copy function, use the Router/Tally>Tally
Copy menu. The settings are common to the parallel and serial tallies.
To display the Tally Copy menu
In the Engineering Setup menu, select VF6 ‘Router/Tally’ and HF5 ‘Tally
Copy.’
The status area shows the tally copy status.
Making new tally copy settings
Use the following procedure.
1
In the Router/Tally>Tally Copy menu, select [New].
The New menu appears.
2
Turn the knob to select the copy-from source.
3
Specify the copy-to source address.
4
Press [Execute].
This makes the tally copy setting according to the specifications in steps 2
and 3.
Modifying tally copy settings
Use the following procedure.
1
In the Router/Tally>Tally Copy menu, press [Modify].
The Modify menu appears.
Knob Parameter Adjustment Setting values
1 Copy From (From) Copy-from source start address 1 to 1024
2 Copy From (To) Copy-from source end address 1 to 1024
Knob Parameter Adjustment Setting values
3 Copy To (From) Copy-to source (start) address 1 to 1024
4 Copy To (To) Copy-to source (end) address 1 to 1024