Filter
Top Products
Chapter 11 DME Operations
58
DME Special Effect Operations
To apply the Panorama effect
With the Panorama menu displayed, set the following parameters.
Page Turn settings
The Page Turn effect turns the image like turning a page.
To apply the Page Turn effect
With the Page Turn menu displayed, use the following procedure.
1
In the <Split Mode> group, select the split mode.
H&V: The image turns as it is split from the center into 4 parts: left, right,
upper, lower.
H: The image turns as it is split from the center into 2 parts: left, right.
V: The image turns as it is split from the center into 2 parts: upper, lower.
When nothing is selected (Off): There are no splits and the image turns
from the edge.
2
Press [Page Turn], then set the following parameters.
a) When split mode is H&V
b) When split mode is H
c) When split mode is V
d) When split mode is Off
To set the input signal of the back page
1
In the <Back Video> group, select the signal input into the back page.
Self: Use the same signal as the front page.
Flat: Use a flat color.
Hue Rotation: Gradually vary the hue.
Knob Parameter Adjustment Setting values
1 Curve H Horizontal curve ratio −100.00 to +100.00
2 Curve V Vertical curve ratio −100.00 to +100.00
3 Position H Horizontal curve center position −4.000 to +4.000
4 Position V Vertical curve center position −3.000 to +3.000
Knob Parameter Adjustment Setting values
1 Radius Radius of turn part 0.00 to 100.00
2 Offset Amount of turn −100.00 to +100.00
3 Angle Angle of turn
−0.250 to +0.000
a)
−0.250 to +0.250
b)
−0.500 to +0.000
c)
−8.000 to +8.000
d)