Sony CCp-8000 Water Dispenser User Manual


 
277Setup Relating to DCU
Chapter 16 Engineering Setup
3
Press [Port Setting].
The DCU>Serial Port Assign>DDR SD9P Setting menu appears.
At the top of the status area, the relevant serial port, slot number, protocol,
serial port name, SCU number, and disk recorder type appear. In the lower
part of the status area, the response speed settings appear.
4
Using any of the following methods, specify the item to which the
response speed setting applies.
Press directly on the list in the status area.
Press the arrow keys to scroll the reverse video cursor.
Turn the knob to make the selection.
a) 1. Maximum Open Delay: maximum time required to open a file
2. Maximum Cueup Delay: maximum time required to cue up a file
3. Play After Cueup Delay: maximum delay time from the cued-up state to begin playback
4. Play After Open Next Delay: maximum delay time from the Open Next state to begin
playback
5
Turn the knob to set the disk recorder response speed.
6
Press [Set].
This confirms the setting.
7
Repeat steps 4 to 6 as required to make the settings for other items.
Knob Parameter Adjustment Setting values
1 Item No Item selection
1 to 4
a)
Knob Parameter Adjustment Setting values
2 Setting Response speed setting 0 to 255