Filter
Top Products
61DME Special Effect Operations
Chapter 11 DME Operations
To make the fragments stardust
Use the following procedure.
1
Press [Pixel], turning it on.
2
Set the following parameters.
To set the explosion center point
Use the following procedure.
1
Press [Position], turning it on.
2
Set the following parameters.
Swirl settings
The Swirl effect swirls the image.
To apply the Swirl effect
With the Swirl menu displayed, set the following parameters.
2 Curve Degree to which image periphery
expands
0.00 to 100.00
3 Aspect Aspect ratio of waveform −100.00 to +100.00
4 Angle Slant of waveform −8.000 to +8.000
Knob Parameter Adjustment Setting values
Knob Parameter Adjustment Setting values
1 Density Degree to which image
disappears
0.00 to 100.00
2 Random Degree of randomness in flying
out fragment positions
0.00 to 100.00
Knob Parameter Adjustment Setting values
1 H Center point in horizontal
direction
−5.000 to +5.000
2 V Center point in vertical direction −4.000 to +4.000
Knob Parameter Adjustment Setting values
1 Transition Swirl amount 0.00 to 100.00
2 Center Amount of rotation in center of swirl −8.000 to +8.000
3 Outer Amount of rotation outside of Area −8.000 to +8.000
4 Area Region of swirl 0.00 to 100.00