Sony CCp-8000 Water Dispenser User Manual


 
Chapter 11 DME Operations
74
DME Special Effect Operations
The Bkgd menu appears.
2
Press [Bkgd], turning it on.
The Background effect is enabled. You can adjust the parameters with the
knobs.
3
Set the parameters.
Separate Sides Settings
This effect applies separate video signals and key signals to the front and back
of the image.
For an illustration of the concept of front and back, see “DME Special Effects”
in Chapter 1 (Volume 1).
Applying the Separate Sides effect
Use the following procedure.
1
In the DME menu, select VF6 ‘Input/Output’ and HF2 ‘Video/Key.’
The Video/Key menu appears.
2
Press [Separate Side], turning it on.
The Separate Sides effect is enabled. If the video and key signals currently
being output to the monitor are the front side, you can select the front
signals. If they are the back side, you can select the back signals. Video and
key signals are selected with the cross-point control blocks of each M/E
bank or the PGM/PST bank.
Invert Settings
Inverts the input video signal and key signal horizontally or vertically. You can
make separate settings for the front and back.
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00